NOSFET Aero "Lift Kit" - ¾ Inch Rubber Riser Blocks
NOSFET Aero "Lift Kit" - ¾ Inch Rubber Riser Blocks
NOSFET Aero "Lift Kit" - ¾ Inch Rubber Riser Blocks
NOSFET Aero "Lift Kit" - ¾ Inch Rubber Riser Blocks
NOSFET Aero "Lift Kit" - ¾ Inch Rubber Riser Blocks

NOSFET Aero "Lift Kit" - ¾ Inch Rubber Riser Blocks

Please read the order instructions carefully all orders are final.
Regular price$12.50
/

Color

Transform Your Ride with Better Ground Clearance 

Boost your NOSFET Aero's performance off road!

      What's Included.  1 set (2 blocks) riser for Nosfet Aero 

 Key Benefits:

  • ¾ Inch (16 mm) Additional Clearance - Navigate obstacles with confidence, reducing pedal clipping.
  • Heavy Rider Support - offsets sag for riders of heavier weights
  • Premium Rubber Construction - Durable, weather-resistant material that lasts - Don't break just Flexes. 
  • Secure Installation - Won't fall out once properly installed
  • Less pedal strikes - less pedal strikes closer in ride height to other off-road wheels
  • 100% Reversible - Easy to remove if you change your mind

 Perfect For:

  • Riders seeking improved ground clearance
  • Heavy riders experiencing suspension sag 
  • Off-road and urban commuting 
  • Enhanced rideability and confidence 

 Note. This does not affect the suspension travel, it simply moves  the entire suspension up ¾ of an inch. Increasing the pedal Clearance by the same amount. 

Note . please read the instructions below carefully.  We are not responsible if you install this product incorrectly. 

Use collapsible tabs for more detailed information that will help customers make a purchasing decision.

Ex: Shipping and return policies, size guides, and other common questions.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Installation Guide

It's a pretty simple, and easy installation. All you'll need is a 4mm hex wrench and 10 minutes. Loctite is a good idea too

The proses is 100% reversible And if you have any questions just reach out and we would be happy to help

Note. This does not change the amount of suspension travel your wheel has,it simply moves it up for better pedal to ground clearance .

1

Getting started

Installation instructions:

It's pretty simple,

Power off the wheel and lay it on its side.

Then you just loosen the 4 shock clamp bolts as shown in the photo circled in red (not the axle bolts)

Don't take the bolts entirely out at this time.

The suspension may have to be compressed slightly at this point to reach all 4 bolts

Getting started
2

The suspension may have to be compressed slightly at this point to reach all 4 bolts

Once the bolts are loosened, pull the wheel away or out from the body of the EUC; it will extend (move up from the bottom bracket) about an inch or so.

3

Begin to reassemble

Put the block in the gap (it should be very snug).Then put pressure on the wheel, preferably just stand the wheel upright and let it sit on the block.

You then snug 2 bolts.

We recommend taking 2 bolts entirely out at a time (to avoid mixing anything up) and applying blue Loctite.

After all 4 bolts have been put back in then it's just down to tightening it back up.

Begin to reassemble
4

The suspension may have to be compressed slightly at this point to reach the rest of the bolts.

5

That should do it . Get back to riding!


Recently viewed