FULL TILT Builder
FULL TILT Builder
FULL TILT Builder
FULL TILT Builder
FULL TILT Builder
FULL TILT Builder
FULL TILT Builder
FULL TILT Builder
FULL TILT Builder
FULL TILT Builder
FULL TILT Builder
FULL TILT Builder
FULL TILT Builder
FULL TILT Builder
FULL TILT Builder
FULL TILT Builder
FULL TILT Builder
FULL TILT Builder
FULL TILT Builder
FULL TILT Builder
FULL TILT Builder
FULL TILT Builder
FULL TILT Builder

FULL TILT Builder

Please read the order instructions carefully all orders are final.
Regular price$175.00
/

Front Pad Size
Back Pad Size

If you're looking for a full set of euc pads in standard configuration we suggest you order from the main products we offer (Aero) (small) (medium) (full size) or (large XL)

Recommend pad  combinations:      also check the reference photo guide 

Small front pad 2.5 with a small back pad 3.2.                          (good for seated riding with good brake authority)

Medium front pad 3.2 with small back pads 3.2.                           (Good for riders who need more heel room) 

Small front pads 3.2 with full size back pads 3.2.                            ( for a good racing setup) 🏁 sync like with bigger brakes 

 

Note:  follow these instructions on how to order.

Pick the verdant (size of pads) you want 

 then configure the color combination you want. This helps us know exactly what you want. All sets of pads come with one of the configurable color options. 

NOTE: more color options and patterns can be found below for purchase separately 

  power pad color.   is the color of the pad (not the insert)

  size.  is the size or style of pad 

  pad depth.   is the depth (how far it protrudes from the side of the wheel. The 3.2 inch is similar to the "sync" and 2.5 inch is similar to the "flow" in depth

the small Back pad is the same size as the aero brake pad but can be combine with any size front pads to give you more heel room. 

These pads are more customized for If you like to mix and match or just know exactly what you want. Also, if you don't see something you like just contact us 

you will need to order a "Front' and a "Brake" (back) to complete a set.                                             

Note: Products from this page are built to order so they do take longer to ship (you will receive in 7 to14 days.)

Use collapsible tabs for more detailed information that will help customers make a purchasing decision.

Ex: Shipping and return policies, size guides, and other common questions.

This site is protected by hCaptcha and the hCaptcha Privacy Policy and Terms of Service apply.

Installation Guide

Follow these simple steps to install your inserts correctly.

1

We'll start with the removal process

We recommend using a butter knife to remove and install the inserts. Find the long edge of the insert.

We'll start with the removal process
2

Slide the butter knife in between the rubber and the insert. It should only go in about ¼of an inch. And then use it to pry under the insert. Ones under use the butter knife to lift the insert out. It should be tight .

3

Rrepeat until all are removed

Rrepeat until all are removed
4

Next is installation

Start with the long peaces in first. On the long pecses put both ends in wile holding the center up out.

Next is installation
5

Press the center down in .make sure that they are pressed in behind the rubber ridge. Then put the smaller pieces in .start with the smallest end.

6

Ues the butter knife to gide the piece in.

Add step 6 image

Recently viewed

Customer Reviews

Be the first to write a review
0%
(0)
0%
(0)
0%
(0)
0%
(0)
0%
(0)